Sealmaster ERX-24T-HI Ball Insert Bearings

Characteristic inner ring frequency, BPFI:12.77 Hz; d1:151 mm; Fatigue limit load, Cu:51.2 kN; T:47.62 mm; Characteristic outer ring frequency, BPF0:10.23 Hz; B:49.21 mm; d:115.09 mm; Brand:NTN; Static load, C0:475 kN; ra max:8 mm;

Mass:0.44 kg; ras max:1 mm; t:2.5 mm; Brand:NTN; F:120 mm; Lubrication hole on inner ring:Non/No; d:110 mm; B:30 mm; Precision class:P0; rs min:1 mm;

Bearing Ring Type:Type NU; Rolling Element Material:Steel; Days to Ship:15 Days; Holder Color:No; Load Direction:Radial; Accuracy(Class):No; O.D.(Ø):200; Holder Color:No; Low Torque Specification:No; Precision Grade Symbol:No;

B:96 mm; Recommended tightening torque for set screw:64 Nm; S:40 mm; D:180 mm; Weight:6.84 kg; r:3; G:M16x1,5; SW:8 mm; d:85 mm; T max.:100 °C;

Designation of closed end cover:SCC205; G:M6x1; Dz:60 mm; A1:24 mm; C:14 kN; d:25 mm; B:27 mm; H:80 mm; J:105 mm; T max.:100 °C;

S:7.5 mm; m:5 mm; C1:4 mm; Weight:0.15 kg; B:21.4 mm; C:14 mm; G:M6x1; SW:3 mm; d1:32.4 mm; r:0.6;

J:129 mm; T max.:200 °C; H:46.2 mm; Designation of housing:PLE207N-; d:34.92 mm; G:M6x1; H1:16 mm; L:166 mm; Weight:1.33 kg; A1:30.5 mm;

Days to Ship:8 Days; Bearing Unit, Type:Square flange shape; Stroke:No; Unit, Type:Insert Bearing Unit; Fit:J7; Rolling Element Material:Bearing Steel; Bearing Inner Dia. Shape:Cylindrical Bore Set; Surface Treatment:No; Rolling Element Material:Bearing Steel; Accessory:No Cover;

radial static load capacity:17900 N; C1:0.8 mm; D:35 mm; Max operating temperature, Tmax:120 °C; Category:Ball Bearings; Radial clearance class:CN; B1:52 mm; Cr:12.2 kN; Inventory:0.0; radial dynamic load capacity:12200 N;

da min:19 mm; Mass:0.02 kg; Characteristic rolling element frequency, BSF:5.7 Hz; f0:14.7; Radial clearance class:CN; Nlim (grease):14,000 rpm; Fatigue limit load, Cu:0.12 kN; Min operating temperature, Tmin:-25 °C; B:7 mm; Characteristic cage frequency, FTF:0.42 Hz;

B:65.1 mm; G:M6x1; H:69.8 mm; Dz:120 mm; T min.:-20 °C; S:25.4 mm; Designation of housing:P212N-; Recommended tightening torque for set screw:16.8 Nm; H2:138 mm; Z:90 mm;

P:150 mm; A2:28 mm; Z:18.7 mm; A:37 mm; N:22mm; B:38.1 mm; L3:57 mm; A5:22.2 mm; s1:19.05 mm; N1:16 mm;

Shape:L-Shaped; Width T(mm):36; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Number of Bearings:Single; RoHS:6; Bearing Used:Deep Groove Ball Bea; Height Indication:Height Selection; Height H(mm):40 ～ 60;

Shape:Flanged Pilot Type; RoHS:6; Housing Material:1045 Carbon Steel; Shape:Flanged Pilot Type; Number of Bearings:Single; Holder Surface Treatment:Black Oxide Coating; Days to Ship:7 Days; Bearing Part Number:6903; Bearing Retained:Yes (with retaining; Number of Bearings:Single;

Machining:No; Bearing Inner Dia. Shape:Tapered hole adapter; RoHS:6; Stroke:No; Bearing Inner Dia. Shape:Tapered hole adapter; Diameter series symbol:Used for Light load; Unit Body Material:Cast Iron; Basic Load Rating, Dynamic Rating(N):34100; Fit:J7; d:40;